Free Feb-2025 UPDATED Cisco 300-510 Certification Exam Dumps is Online
Cisco Exam 2025 300-510 Dumps Updated Questions
Cisco 300-510 Exam Certification Details:
| Sample Questions | Cisco 300-510 Sample Questions |
| Number of Questions | 55-65 |
| Recommended Training | Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) |
| Exam Code | 300-510 SPRI |
| Exam Name | Implementing Cisco Service Provider Advanced Routing Solutions |
NEW QUESTION # 65
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. local preference
- B. MED
- C. origin
- D. weight
Answer: A
Explanation:
Weight is local to the router while LP allows routers in an AS with multiple exit points to choose which exit point is used to reach a particular NLRI.
NEW QUESTION # 66
Refer to the exhibit.
A customer reports that Host-1 is failing to receive streaming traffic from the IPTV source. The engineer has confirmed that hosts on router R2 are receiving traffic normally and that Host-1 is correctly sending subscription messages to join the IPTV stream. Which action must the engineer take to correct the problem?
- A. Configure IP PIM SSM and IGMP version 2 under interface GigatxtEthernet 1/0/1 on R3
- B. Configure IGMP version 3 under interface GigabitEthernet 1/(V1 on R3
- C. Remove IP PIM SSM and IGMP from interface GigaEthernet 1/0/1 on R3 and configure under global configuration
- D. Remove IP PIM SSM from the global configuration on R3 and configure it under the GigabitEthernet 1/0/1 interface
Answer: B
NEW QUESTION # 67
What is determined by running the same hash algorithm on all PIMv2 routers?
- A. Which BSR to use for a particular multicast group
- B. Which RP to use from a set of candidate RPs in the RP set
- C. Auto RP election
- D. The SPT from the RP to the multicast source
- E. The SPT from the last hop router to the multicast source
Answer: B
NEW QUESTION # 68
Refer to the exhibit.
After these configurations were applied to routers R1 and R2. the two devices cannot form a neighbor relationship What is the reason tor the problem?
- A. The two routers have different iS-types
- B. The two routers have the same area ID.
- C. The two routers cannot authenticate with one another
- D. The two routers have the same network ID
Answer: C
NEW QUESTION # 69
Refer to the exhibit.
Which LSA type is indicated by this router output?
- A. type 3 LSA
- B. type 1 LSA
- C. type 4 LSA
- D. type 2 LSA
Answer: B
NEW QUESTION # 70
Refer to the exhibit
Router R1 is configured to advertise outgoing SA messages to routers R2 and R3, but to receive incoming SA messages only from R2. Which additional configuration must an engineer apply to router R1 so it filters all MSDP SA messages from Domain-C?
- A. R1# ip msdp sa-filter in 192.168.3.1
- B. R1# ip msdp password peer 192.168.3.1
- C. R3# ip msdp password peer 192.168.1.1
- D. R3# ip msdp sa-filter out 192.168.3.1
Answer: A
NEW QUESTION # 71
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only the administratively scoped range is permitted
- B. Only the default SSM range is permitted
- C. Only ASM is permitted
- D. Only GLOP is permitted
Answer: B
NEW QUESTION # 72
How does SRv6 function on the control plane?
- A. The Ingress node of the SR domain adds a uSlD format IPv6 header to carry the SRv6 locator.
- B. The egress node of SR domain imposes a new outer header
- C. It enables SRH-capable nodes to terminate IPv6 packets at the network egress to carry the SRv6 locator.
- D. The ingress node of the SR domain swaps the SRv6 header for the IPv6 header
Answer: A
NEW QUESTION # 73
Refer to the exhibit.
Early in the growth cycle of a small enterprise the network-engineering team implemented segment routing to support automation of the IPv4 network As the network grew organically more devices were added and the company migrated to SRv6 The company is now planning to significantly expand the number of hosts connected to R2 and R6 which will require further path manipulation Which action must the team take to customize the route that traffic takes between endpoints in the network?
- A. Implement priority queuing to drop non-mission-critical traffic.
- B. Implement MLAG to reduce traffic load on heavily congested links
- C. Implement the flexible algorithm to customize the shortest path through the network
- D. Implement spanning-tree protocol to avoid loops between excess devices in the network
Answer: C
NEW QUESTION # 74 
Refer to the exhibit. Customers A and C are experiencing packet drops when connecting to the application server.
While troubleshooting the problem the network engineer confirms that the IS-lS Level- 1/2 adjacency is up between routers A B C. and D and both customers can communicate with the database server without packet loss.
Which action must the engineer take to resolve the issue?
- A. Leak the customer A and customer C subnets in the router A IS-IS database.
- B. Advertise the application server subnet in the router D IS-IS database
- C. Advertise a static default route to the router B IS-IS database.
- D. Leak the 172, 17.10/24 route in the IS-IS databases on routers A and C.
Answer: B
NEW QUESTION # 75
Refer to the exhibit.
Refer to the exhibit. Excessive routes are flooding from network 150.0.0.0 into AS100. Internet traffic between AS400 and AS300 is working normally. No route controlling mechanism is applied on incoming and outgoing traffic Which configuration resolves the issue?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: A
NEW QUESTION # 76
Refer to the exhibit.
Refer to the exhibit The branch office in area 10 is connected to HQ via Frame Relay uplinks with bandwidth constraints After a recent implementation of QoS on the R2 and R3 networks the system has been logging %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x224E321, alignment 0 messages To reduce traffic load and memory utilization on R2 and R3 the network engineer configured R1 to announce only one user subnet per location by issuing the summary address 192.168.0.0 255.255.248.0 command en R1 However, the engineer noticed that router R2 still has two routes and a summary address from HQ and R3 also has two routes from HQ Which two actions must the engineer take on R1 to fix the issue so that only one route is announced' (Choose two.)
- A. Configure a summary route for Level 1-Level 2 devices.
- B. Redistribute both routes into the ISIS process.
- C. Configure RI as a Level 1 device.
- D. Configure the subnet range with the network command under the IS-IS process.
- E. Configure a summary route for Level 1 devices.
Answer: A,E
NEW QUESTION # 77
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html
NEW QUESTION # 78
Refer to the exhibit.
A network engineer has divided AS into confederations. Due to repeated ASN, when the 10.0 0.0/8 prefix from R1 arrives to R2, BGP automatically rejects it. What should the engineer do to fix the problem so that BGP allows that prefix on R2?
- A. Configure the command allowas-in on all the PE routers.
- B. Configure the command as-override on R1.
- C. Configure the command allowas-in on R2.
- D. Configure the command as-override on R2.
Answer: C
NEW QUESTION # 79
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
Refer to the Tasks tab to view the tasks for this lab item.
Refer to the Topology tab to access the device console(s) and perform the tasks.
Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
All necessary preconfigurations have been applied.
Do not change the enable password or hostname for any device.
Save your configurations to NVRAM before moving to the next item.
Click Next at the bottom of the screen to submit this lab and move to the next question.
When Next is clicked, the lab doses and cannot be reopened.
Topology
Tasks
Configure and verify an OSPF neighbor adjacency between R1 and R2 in OSPF area 0 according to the topology to achieve these goals:
1. R1 pings the Loopback0 interface of R2. Use interface-level configuration to complete this task.
2. R2 pings the Loopback0 interface of R1. Use interface-level configuration to complete this task.
3. R2 receives a single summary route 172.16.100.0/22 for networks 172.16.100.0/24, 172.16.101.0/24, and 172.16.103.0/24.
Answer:
Explanation:
NEW QUESTION # 80
Refer to the exhibit.
The service provider deployed segment routing in its core P2 is connected to P3 and P4 via a point-to- multipoint link as shown The service provider provides connectivity for a large enterprise with three main offices in different geographic regions Each office is connected via one of the three PEs The enterprise wants to implement multicast traffic across the service provider to stream mission-critical applications between sites The applications will be sourced from a server connected to the network through PE2 Which action must the network-engineering team take so that multicast traffic will flow between the enterprise sites over the point-to- multipoint link?
- A. Implement SR Tree-SID to build a multicast replication tree over the point-to-multipoint link
- B. Implement RSVP to reserve bandwidth on the link between PE2 and P2
- C. Implement MLDP to allow multicast traffic to flow within the single AS
- D. Implement PIM-DM to flood multicast traffic from the enterprise into the service provider core
Answer: A
NEW QUESTION # 81
Refer to the exhibit.
An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?
- A. The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
- B. The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
- C. The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.
- D. The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.
Answer: D
NEW QUESTION # 82
Refer to the exhibit. An engineer working on a client's network is trying to solve the BGP community issue on R1 and R2 routers. After displaying the BGP entries, the engineer notices that both routers still have different outputs. Which action must the engineer perform to any of the routers to correct the problem and get the same output?
- A. Advertise the route to Router2 as standard community.
- B. Execute the lp bgp-community new-format command in Router1.
- C. Remove the lp bgp-community new-format command in Router1.
- D. Advertise the route to Router2 as extended community.
Answer: B
Explanation:
https://www.noction.com/blog/understanding-bgp-communities
NEW QUESTION # 83
An engineer is troubleshooting slow performance issues on a customer's network after the last multicast configuration change was applied on it While checking the running configuration on the router the engineer notices there are many ip igmp join-group commands applied on several interfaces of the router which caused the high CPU utilization usage. What action must the engineer take to solve this issue?
- A. Configure all router interfaces to be process-switched by increasing the query interval
- B. Configure ip igmp static-group command on all interfaces
- C. Remove unnecessary members from the IGMP group
- D. Remove ip igmp join-group command on all unnecessary interfaces
Answer: D
NEW QUESTION # 84
What are the two characteristics of route reflectors? (Choose two.)
- A. Routes received from nonclient peers are reflected to route reflector clients as well as nonclient peers.
- B. Routes received from a route reflector Client are reflected to other clients and nonclient peers.
- C. If a route reflector receives a route with a cluster-list attribute containing a different cluster ID, the route is discarded.
- D. If a router received an iBGP route with the originator-ID attribute set to its owm router ID, the route is discarded.
- E. Routes received from nonclient peers are reflected to route renector cluster as well as OSPF peers.
Answer: B,D
NEW QUESTION # 85
Refer to the exhibit.
Refer to the exhibit. The service provider operations team was alerted that hub site traffic from BGP AS 65101 to AS 65201 uses a non-primary path via the R5-R6 link. IBGP peering between R1 and R2 is up. and no fiber failure has been reported on the R2-R3 link The team determined that the traffic flow between 10.10.10.1 and 192.168.30.1 is not considering the R1-R2-R3-R4 path. Which action resolves this issue?
- A. Change the local-preference attribute to 50 with neighbor 10.10 10 5 on R1
- B. Add metric 5 with BGP neighbor 10.10.10.6 on R5for receiving routes.
- C. Change the metric attribute to 20 with neighbor 10.10.10.5 on R1.
- D. Set the local-preference to the default value with BGP neighbor 10 10.10.3 on R2 for receiving routes.
Answer: A
NEW QUESTION # 86
Refer to the exhibit. The branch office in area 10 is connected to HQ via Frame Relay uplinks with bandwidth constraints. After a recent implementation of QoS on the R2 and R3 networks the system has been logging %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from
0x224E321, alignment 0 messages. To reduce traffic load and memory utilization on R2 and R3 the network engineer configured R1 to announce only one user subnet per location by issuing the summary address 192.168.0.0 255.255.248.0 command en R1. However, the engineer noticed that router R2 still has two routes and a summary address from HQ and R3 also has two routes from HQ. Which two actions must the engineer take on R1 to fix the issue so that only one route is announced? (Choose two.)
- A. Configure a summary route for Level 1-Level 2 devices.
- B. Redistribute both routes into the ISIS process.
- C. Configure RI as a Level 1 device.
- D. Configure the subnet range with the network command under the IS-IS process.
- E. Configure a summary route for Level 1 devices.
Answer: A,E
NEW QUESTION # 87
Refer to the exhibit. A network engineer is investigating a report of packet drops in an application running on a server connected to PE2. The engineer determined that:
- The OSPF adjacency in area 0 is up, and it is learning the loopback
addresses of all routers in area 0.
- Traffic from users connected to PE1 to the application is also
passing normally.
- Packets from PE2 back to PE1 are being dropped.
Which action resolves the issue?
- A. RR2(config)# router bgp 100
RR2(config-router)# no neighbor 10.10.20.1 send-label - B. RR2(config)# router bgp 100
RR2(config-router)# redistribute ospf 100 - C. RR1(config)# router bgp 100
RR1(config-router)# redistribute ospf 100 - D. RR1(config)# router bgp 100
RR1(config-router)# neighbor 10.10.30.1 send-label
Answer: D
NEW QUESTION # 88
......
Cisco 300-510 certification exam is a valuable credential for IT professionals who want to advance their careers in service provider networking. It demonstrates their proficiency in implementing advanced routing solutions and technologies, which are essential for ensuring the reliability, scalability, and performance of service provider networks. Implementing Cisco Service Provider Advanced Routing Solutions certification can also help candidates differentiate themselves from their peers and gain recognition from their employers as experts in advanced routing solutions.
Cisco 300-510 certification exam is designed to test the knowledge and skills of IT professionals in implementing advanced routing solutions for service providers. 300-510 exam is intended for individuals who are interested in pursuing a career in the field of networking and specifically in the service provider industry. Passing 300-510 exam is a prerequisite for obtaining the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification.
Cisco Certified 300-510 Dumps Questions Valid 300-510 Materials: https://www.prepawayexam.com/Cisco/braindumps.300-510.ete.file.html
Get The Most Updated 300-510 Dumps To CCNP Service Provider Certification: https://drive.google.com/open?id=1lS9Pjx3deUdfPbWUOa1RqWb-_uzVaKkD