Updated Aug 08, 2022 Certification Exam 300-615 Dumps - Practice Test Questions
Updated Verified 300-615 dumps Q&As - Pass Guarantee or Full Refund
Standard Exam Characteristics
The exam tries to impart validated cognizance on subject matters like networking, computing, automation, and operations. It contains multiple-choice questions, and the allotted time duration is 90 minutes.
The test can only be taken in the English language presently and is available globally via physical centers and an online proctoring facility. Pearson VUE is the Cisco’s partner and administers 300-615 test, so one has to register on their website to sit for it. Also, a fee of $300 is required and should be paid as an exam voucher.
The score you gain comes with a three-year validity. Then, one needs to fulfill the recertification requirements to continue enjoying the benefits of being accredited.
How to study the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam
Nothing would be more frustrating than showing up for the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure and finding out that you studied the wrong material. The PrepAwayExam team knows how vital it is to have high-quality test materials that stand up to the real test. All of our study material is checked frequently by trade professionals before being greenlit. We don't stop there either. Our material is constantly tested so any updates to the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam or other exams will be reflected in the questions. You can even return and review post-exam day till you know the Cisco material by rote confidently it won't be superannuated.
NEW QUESTION 68
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 69
Refer to the exhibit.
Refer to the exhibit. customer reports that all Intra-EPG isolation stopped working within a bare-metal tenant. Postman is running on a machine to get information from the APIC in case of orchestration failure. Which action resolves the issue?.
- A. Match encap="vlan-10" and primaryEncap="vlan-110"
- B. Change pcEnfPref="unenforced" to pcEnfPref="enforced".
- C. Modify the GET command to reference the valid path for the managed object
- D. Remove primaryEncap="vlan-110" from the specific port path.
Answer: D
NEW QUESTION 70
Refer to the exhibit.
Refer to the exhibit. During a maintenance window of the Nexus switch pair, one of the Cisco Nexus chassis was brought offline for maintenance. The primary Cisco Nexus switch was stable during the maintenance window. After finishing the tasks on the chassis, the administrator wanted to bring the second switch online. The administrator checked the status of the disconnected switch that was removed from the vPC during the maintenance. The engineer must connect the peer chassis seamlessly with the primary vPC peer without experiencing traffic interruption. Which action accomplishes this goal?
- A. Change the auto recovery timer to active if not already set, then re-establish the connectivity.
- B. Change the auto recovery to disabled, and enable auto recovery.
- C. Change the auto timer to a higher value, then connect the peer switch.
- D. Change the role priority, then connect the peer switch.
Answer: C
NEW QUESTION 71 
Refer to the exhibit. A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?
- A. fabric interconnect uplink interface
- B. IOM network interface
- C. server interface
- D. IOM host interface
Answer: A
Explanation:
Section: Compute Platforms
NEW QUESTION 72 
Refer to the exhibit. When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
- A. Port 15 is configured as an Ethernet port.
- B. Port 15 is configured for 4-Gb FC.
- C. The polarity of the fiber cable is reversed.
- D. Port 15 is missing a license.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION 73
Refer to the exhibit.
An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Adjust the MTU on Router-B to 1604.
- B. Set the OSPF media type to point-to-point.
- C. Disable the check of the MTU value.
- D. Adjust the MTU on Router-A to 1600.
Answer: C
NEW QUESTION 74
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
- B. Configure a QoS policy on the vNIC.
- C. Configure an MTU size of 9000 on the appliance port.
- D. Statically configure the target information in the Boot Policy.
Answer: D
NEW QUESTION 75
Refer to the exhibit.
An administrator directly connects a Fibre Channel storage array to ports 1 through 4 on a Cisco UCS 6454 Fabric Interconnect. The administrator configures a service profile to boot directly from the new Fibre Channel storage array, but the service profile fails to boot. When the administrator checks the output of the show flogi database command on the fabric interconnect, it shows the output presented in the exhibit. Which action resolves the issue?
- A. Configure the Zoning Type in vHBA Initiator Group as Multiple Initiator Multiple Target.
- B. Configure the Zoning Type in vHBA Initiator Group as Multiple Initiator Single Target.
- C. Configure the fabric interconnects in Fibre Channel end-host mode
- D. Configure the fabric interconnects in Fibre Channel switch mode.
Answer: D
NEW QUESTION 76
Refer to the exhibit.
A Postman call to a Cisco APIC fails. The access credentials were confirmed to be configured as expected. Which action resolves the issue?
- A. Change the IP address to a domain name
- B. Modify the protocol to HTTP
- C. Change operation type to POST
- D. Modify the target protocol type to XML
Answer: C
NEW QUESTION 77
An engineer is implementing a storage VDC, but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)
- A. F-Series module
- B. ESSENTIALS license
- C. STORAGE-ENT license
- D. M-Series module
- E. FCoE license
Answer: A,E
Explanation:
Section: Storage Network
NEW QUESTION 78
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Set the MTU to 1500 bytes.
- B. Configure HSRP version 2.
- C. Enable IP redirects.
- D. Configure the same HSRP group on both devices.
Answer: C
NEW QUESTION 79
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti
NEW QUESTION 80
Refer to the exhibit.
A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?
- A. Update the Python packages on the Cisco Nexus switch directly.
- B. Manually configure NTP in the Guest shell.
- C. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.
- D. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
Answer: D
NEW QUESTION 81
Refer to the exhibit.
The FCoE traffic fails to traverse the vfc2 interface. The VSAN 102 is configured for vfc2. Which action resolves the issue?
- A. Activate DCBX on the interface e101/1/2
- B. Enable LLDP on the interface vfc2
- C. Activate DCBX on the N9K switch
- D. Enable LLDP on the neighbor switch
Answer: D
NEW QUESTION 82
Refer to the exhibit.
Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?
- A. Acknowledge the primary fabric interconnect.
- B. Upgrade the firmware of the infrastructure firmware by using the force option.
- C. Remove the service pack from the subordinate fabric interconnect.
- D. Clear the startup version of the default infrastructure pack.
Answer: D
NEW QUESTION 83
Refer to the Exhibit.
An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?
- A. Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.
- B. Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.
- C. Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- D. Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
Answer: B
NEW QUESTION 84
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 85
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
- B. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
- C. The same Fabric Name value should be used before after wiping all devices.
- D. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
Answer: D
NEW QUESTION 86
Refer to the exhibit.
When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
- A. Port 15 is configured as an Ethernet port.
- B. Port 15 is configured for 4-Gb FC.
- C. The polarity of the fiber cable is reversed.
- D. Port 15 is missing a license.
Answer: B
NEW QUESTION 87
The script fails to convert a JSON variable into a Python dictionary. Which action resolves the issue?
- A. Invoke a function yaml.loads(json._output ,decoder_"json")
- B. Use a json.dumps(json_output) function
- C. Define a json_output as a YAML object, yaml json_output
- D. Fix the JSON syntax by modifying "attribures" to "attribures":
Answer: B
NEW QUESTION 88
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Change the name of one of the zones to match the other zone set.
- B. Ensure that the zone members have different names.
- C. Import or export a zone set between the switches to synchronize the switches.
- D. Set the distribute policy of the zone to full.
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pd
NEW QUESTION 89
......
Exam Engine for 300-615 Exam Free Demo & 365 Day Updates: https://www.prepawayexam.com/Cisco/braindumps.300-615.ete.file.html
300-615 PDF Questions and Testing Engine With 150 Questions: https://drive.google.com/open?id=1JGQYbpe0IY8oNv9FYQcoFDSEjlWr6rae