Grab latest Fortinet NSE4_FGT-6.4 Dumps as PDF Updated on 2021
Newly Released NSE4_FGT-6.4 Dumps for Fortinet NSE 4 Certified
Understanding functional and technical aspects of Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
The following will be dicussed in FORTINET NSE4_FGT-6.4 dumps:
- Identify users using firewall policies
- Diagnosing declined IKE exchanges
- Deploying FortiGate devices as an HA cluster for fault tolerance
- Learn examining traffic transparently, forwarding
- Learn partitioning FortiGate into two or more virtual devices
- Gain knowledge on how to utilize the GUI and CLI for management
- Collection of log entries
- Standard or non-standard protocols and ports
- Gain experience to configure security profiles to offset threats and ill-usage, including viruses, torrents, and improper websites
- Understand encryption uses and certificates
- Deploying FortiGate devices as an HA cluster for high performance
- Learn the deployment of proper operation mode for any network
- Executing a meshed or partially redundant VPN
- Learn about SSL/TLS-secured traffic
- Learn features of the Fortinet Security Fabric
- Understanding network access to configured networks
- Learn application control methods to monitor and control network applications
- Authorizing an IPsec VPN tunnel connecting two FortiGate devices
- SSL VPN
- Proposing Fortinet Single Sign-On access to network services, integrated with Microsoft Active Directory
- Learn port forwarding, source NAT, and destination NAT
- Modes of hacking and denial of service (DoS) attacks
- Understanding of encryption used to bypass security policies
- Learn to load balance traffic amid multiple WAN links efficiently
- How to Deploy implicit and explicit proxy with firewall policies, authentication, and caching
How to Prepare For Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Preparation Guide for Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Introduction for Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
This guide provides a step by step framework of the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional course exam including a broad array of essentials of the test, the exam design, themes, test complexities and readiness techniques, and the intended interest group profile. Thus, we prepare various FORTINET NSE4_FGT-6.4 dumps as we understand understudy determinations. Our content, helps candidatesâ total assessments.
Fortinet released its initial product, FortiGate, a firewall, in 2002, succeeded by anti-spam and anti-virus software. FortiGate was upgraded to use application-specific integrated circuit (ASIC) architecture.
The Network Security Professional designation recognizes your ability to install and manage the day-to-day configuration, monitoring, and operation of a FortiGate device to support specific corporate network security policies.
We recommend this exam for network and security professionals who are involved in the day-to-day management, implementation, and administration of a security infrastructure using FortiGate devices
Originally, the FortiGate was a material, rack-mounted product but later on, it became available also as a virtual appliance able to run on virtualization platforms like VMware vSphere. Fortinet also joined its network security offerings, including firewalls, anti-spam and anti-virus software, into a single product. Fortinet began developing its Security Fabric architecture in April 2016, so many network security products could communicate as one program. The same year, the company supplemented Security Information and Event Management (SIEM) products. In September 2016, the company declared it would combine the SIEM products with the security systems of other merchants.
The Network Security Professional (Fortinet NSE4_FGT-6.4) course identifies a person’s capability to establish and maintain the day-to-day configuration, monitoring, and operation of a FortiGate device to carry out particular corporate network security policies.
If you are a customer or a public user, you must first create an account on the NSE Institute. You must use your company email address to register. You must purchase your training though your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
With 46,000+ active user certifications, the Fortinet Network Security Expert certification program is earning notable critical mass and industry attention. The value of the Fortinet NSE designation is verified every day by security specialists in the field and by trusted sources.
After finishing this course, the candidate will be able to:
- Configure security profiles to offset threats and ill-usage, including viruses, torrents, and improper websites
- Configure SD-WAN to load balance traffic amid multiple WAN links efficiently
- Examine SSL/TLS-secured traffic to stop encryption used to bypass security policies
- Deploy implicit and explicit proxy with firewall policies, authentication, and caching
- Utilize the GUI and CLI for management
- Manage network access to configured networks using firewall policies
- Deploy FortiGate devices as an HA cluster for fault tolerance and high performance
- Partition FortiGate into two or more virtual devices, each operating as an autonomous FortiGate, by configuring virtual domains
- Offer an SSL VPN for secure access to a private network
- Implement port forwarding, source NAT, and destination NAT
- Implement application control methods to monitor and control network applications that might use standard or non-standard protocols and ports
- Propose Fortinet Single Sign-On access to network services, integrated with Microsoft Active Directory
- Run packets using policy-based and static routes for multipath and load-balanced deployments
- Deploy the proper operation mode for any network
- Understand encryption uses and certificates
- Recognize the features of the Fortinet Security Fabric
- Examine traffic transparently, forwarding as a Layer 2 device
- Authorize an IPsec VPN tunnel connecting two FortiGate devices
- Verify users using firewall policies
- Examine a FortiGate route table
- Diagnose declined IKE exchanges
- Gather and understand log entries
- Stop hacking and denial of service (DoS) attacks
- Execute a meshed or partially redundant VPN
- Diagnose and repair common problems
Use FORTINET NSE4_FGT-6.4 practice exam and FORTINET NSE4_FGT-6.4 practice tests to prepare for the exam.
NEW QUESTION 91
An administrator has configured a route-based IPsec VPN between two FortiGate devices. Which statement about this IPsec VPN configuration is true?
- A. A virtual IPsec interface is automatically created after the phase 1 configuration is completed.
- B. This VPN cannot be used as part of a hub-and-spoke topology.
- C. The IPsec firewall policies must be placed at the top of the list.
- D. A phase 2 configuration is not required.
Answer: A
Explanation:
In a route-based configuration, FortiGate automatically adds a virtual interface eith the VPN name (Infrastructure Study Guide, 206)
NEW QUESTION 92
Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.)
- A. Log downloads from the GUI are stored as LZ4 compressed files.
- B. Log backups from the CLI can be configured to upload to FTP as a scheduled time
- C. Log backups from the CLI cannot be restored to another FortiGate.
- D. Log downloads from the GUI are limited to the current filter view
Answer: C,D
NEW QUESTION 93
Which of the following are valid actions for FortiGuard category based filter in a web filter profile ui proxy-based inspection mode? (Choose two.)
- A. Learn
- B. Allow
- C. Warning
- D. Exempt
Answer: B,C
NEW QUESTION 94
What is the primary FortiGate election process when the HA override setting is disabled?
- A. Connected monitored ports > HA uptime > Priority > FortiGate Serial number
- B. Connected monitored ports > Priority > HA uptime > FortiGate Serial number
- C. Connected monitored ports > Priority > System uptime > FortiGate Serial number
- D. Connected monitored ports > System uptime > Priority > FortiGate Serial number
Answer: A
NEW QUESTION 95
Which three authentication timeout types are availability for selection on FortiGate? (Choose three.)
- A. hard-timeout
- B. new-session
- C. Idle-timeout
- D. auth-on-demand
- E. soft-timeout
Answer: A,B,C
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD37221
NEW QUESTION 96
Which two actions can you perform only from the root FortiGate in a Security Fabric? (Choose two.)
- A. Shut down/reboot a downstream FortiGate device.
- B. Ban or unban compromised hosts.
- C. Disable FortiAnalyzer logging for a downstream FortiGate device.
- D. Log in to a downstream FortiSwitch device.
Answer: A,C
NEW QUESTION 97
Refer to the exhibit to view the firewall policy.
Which statement is correct if well-known viruses are not being blocked?
- A. The action on the firewall policy must be set to deny.
- B. Web filter should be enabled on the firewall policy to complement the antivirus profile.
- C. The firewall policy does not apply deep content inspection.
- D. The firewall policy must be configured in proxy-based inspection mode.
Answer: B
NEW QUESTION 98
What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.)
- A. Traffic to inappropriate web sites
- B. Credit card data leaks
- C. Traffic to botnetservers
- D. Server information disclosure attacks
- E. SQL injection attacks
Answer: C,D,E
NEW QUESTION 99
Refer to the exhibit.
According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?
- A. A user
- B. A bridge CA
- C. A subordinate
- D. A root CA
Answer: A
NEW QUESTION 100
Examine this PAC file configuration.
Which of the following statements are true? (Choose two.)
- A. Browsers can be configured to retrieve this PAC file from the FortiGate.
- B. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060.
- C. Any web request fortinet.com is allowed to bypass the proxy.
- D. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy.
Answer: A,C
NEW QUESTION 101
What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.)
- A. Traffic to inappropriate web sites
- B. Credit card data leaks
- C. Server information disclosure attacks
- D. SQL injection attacks
- E. Traffic to botnetservers
Answer: B,C,D
Explanation:
https://help.fortinet.com/fweb/570/Content/FortiWeb/fortiweb-admin/web_protection.htm
NEW QUESTION 102
Which of the following statements correctly describes FortiGates route lookup behavior when searching for a suitable gateway? (Choose two)
- A. Lookup is done on the first packet from the session originator
- B. Lookup is done on the last packet sent from the responder
- C. Lookup is done on every packet, regardless of direction
- D. Lookup is done on the trust reply packet from the responder
Answer: A,D
NEW QUESTION 103
Refer to the exhibit.
The exhibit contains a network diagram, central SNAT policy, and IP pool configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1).
Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied.
Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?
- A. 10.200.1.49
- B. 10.200.1.1
- C. 10.200.1.99
- D. 10.200.1.149
Answer: C
NEW QUESTION 104
Examine the network diagram shown in the exhibit, then answer the following question:
Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server?
- A. 172.16.32.0/24 is directly connected, port1
- B. 0.0.0.0/0 [20/0] via 10.4.200.2, port2
- C. 10.4.200.0/30 is directly connected, port2
- D. 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0]
Answer: A
NEW QUESTION 105
What inspection mode does FortiGate use if it is configured as a policy-based next-generation firewall (NGFW)?
- A. Certificate inspection
- B. Flow-based inspection
- C. Proxy-based inspection
- D. Full Content inspection
Answer: B
NEW QUESTION 106
......
Fortinet NSE4_FGT-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
Latest NSE4_FGT-6.4 Exam Dumps Fortinet Exam from Training: https://www.prepawayexam.com/Fortinet/braindumps.NSE4_FGT-6.4.ete.file.html