• Home
  • Articles
  • Practice Examples and Dumps & Tips for 2026 Latest 5V0-22.23 Valid Tests Dumps [Q31-Q56]

Practice Examples and Dumps & Tips for 2026 Latest 5V0-22.23 Valid Tests Dumps [Q31-Q56]

Share

Practice Examples and Dumps & Tips for 2026 Latest 5V0-22.23 Valid Tests Dumps

Latest [Jan 05, 2026] 100% Passing Guarantee - Brilliant 5V0-22.23 Exam Questions PDF


VMware 5V0-22.23 exam is part of the VMware Certified Specialist – vSAN 2021 certification. VMware vSAN Specialist (v2) certification is designed to validate the skills and knowledge of professionals who work with VMware vSAN technology. It demonstrates that the candidate has the skills and knowledge required to design, implement, and administer VMware vSAN solutions. VMware vSAN Specialist (v2) certification is highly valued in the industry and can help professionals to advance their careers.


VMware vSAN Specialist (v2) certification is designed for IT professionals who are responsible for designing, implementing, and managing VMware vSAN solutions. VMware vSAN Specialist (v2) certification validates their expertise in deploying and managing vSAN clusters, configuring vSAN storage policies, and troubleshooting vSAN issues. It is a valuable certification for professionals who want to enhance their career in virtualization and cloud computing.

 

NEW QUESTION # 31
After a planned power outage, an administrator decided to restart the vSAN cluster manually.
What is the correct sequence of steps for the administrator to follow after powering on the ESXi hosts?

  • A. 1. Exit all hosts from maintenance mode.
    2. Run the python reboot helper script only on one ESXi host to recover the cluster.
    3. Enable cluster member updates from vCenter Server on all ESXi hosts.
  • B. 1. Exit all hosts from maintenance mode.
    2. Enable cluster member updates from vCenter Server only on one ESXi host.
    3. Run the python reboot helper script only on one ESXi host to recover the cluster.
  • C. 1. Enable cluster member updates from vCenter Server on all ESXi hosts.
    2. Run the python reboot helper script on all ESXi hosts to recover the cluster.
    3. Exit all hosts from maintenance mode.
  • D. 1. Enable cluster member updates from vCenter Server only on one ESXi host.
    2. Run the python reboot helper script only on one ESXi host to recover the cluster.
    3. Exit all hosts from maintenance mode.

Answer: D

Explanation:
Explanation
This is the sequence of steps recommended by VMware for manually restarting the vSAN cluster after a planned power outage. The steps are as follows:
Enable cluster member updates from vCenter Server only on one ESXi host. This will allow the host to receive the latest cluster membership information from vCenter Server and avoid any conflicts or inconsistencies with other hosts. The command to enable cluster member updates is esxcfg-advcfg -s 1
/VSAN/IgnoreClusterMemberListUpdates.
Run the python reboot helper script only on one ESXi host to recover the cluster. This will prepare the cluster for a manual restart by partitioning the cluster and ensuring that all hosts have consistent metadata. The command to run the python reboot helper script is python
/usr/lib/vmware/vsan/bin/reboot_helper.py prepare.
Exit all hosts from maintenance mode. This will allow the hosts to resume normal operations and join the vSAN cluster. The command to exit maintenance mode is esxcli system maintenanceMode set -e false.
The other options are incorrect for the following reasons:
B, exit all hosts from maintenance mode, run the python reboot helper script only on one ESXi host to recover the cluster, and enable cluster member updates from vCenter Server on all ESXi hosts, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information. Enabling cluster member updates from vCenter Server on all ESXi hosts is also unnecessary and can cause conflicts or inconsistencies with other hosts.
C, exit all hosts from maintenance mode, enable cluster member updates from vCenter Server only on one ESXi host, and run the python reboot helper script only on one ESXi host to recover the cluster, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information.
D, enable cluster member updates from vCenter Server on all ESXi hosts, run the python reboot helper script on all ESXi hosts to recover the cluster, and exit all hosts from maintenance mode, is incorrect because enabling cluster member updates from vCenter Server on all ESXi hosts is unnecessary and can causeconflicts or inconsistencies with other hosts. Running the python reboot helper script on all ESXi hosts concurrently can also cause a race condition that can result in unexpected outcomes.
References:
Manually Shut Down and Restart the vSAN Cluster
Restart the vSAN Cluster


NEW QUESTION # 32
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

  • A. Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on
  • B. Add an individual component to the vLCM image that has the updated NIC driver
  • C. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver
  • D. Remove theVendor Add-on from the vLCM image, and then manually install the network driver on the servers

Answer: B

Explanation:
Explanation
To ensure the latest network driver is installed on the NIC before remediation, the vSAN administrator should add an individual component to the vLCM image that has the updated NIC driver. This action allows the administrator to override the driver provided by the vendor add-on and use a newer version that is compatible with the ESXi version and the hardware device. The administrator can add an individual component to the vLCM image by importing it from a ZIP file or selecting it from the vLCM depot. The other options are not correct. Making sure the vLCM image is configured to use the most recent version of the vendor add-on will not help, as the required NIC driver is a newer version than the one provided by the vendor add-on. Removing the vendor add-on from the vLCM image or modifying the vLCM image to omit the NIC driver will not ensure the latest network driver is installed on the NIC, as these actions will leave the NIC without any driver update. Manually installing or updating the network driver on the servers is not recommended, as it might cause inconsistency and non-compliance in the vLCM image. References: vSphere Lifecycle Manager Image Components; [Add an Individual Component to an Image]


NEW QUESTION # 33
An organization wants to implement a virtual desktop infrastructure (VDI) solution on their vSAN storage.
They also need to store their applications running inside the VDI environment on vSAN storage.
Which two end-user computing (EUC) solutions could be implemented to satisfy the requirements of the organization? (Choose two.)

  • A. Workspace ONE UEM
  • B. Horizon
  • C. Agp_ Volumes
  • D. Workspace ONE Access
  • E. Dynamic Environment Manager

Answer: B,E

Explanation:
Explanation
Horizon and Dynamic Environment Manager are two end-user computing (EUC) solutions that can be implemented on vSAN storage to provide a virtual desktop infrastructure (VDI) solution and store applications running inside the VDI environment. Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, while Dynamic Environment Manager is a tool that provides personalization and dynamic policy configuration across any virtual, physical, and cloud-based Windows desktop environment. The other solutions are not directly related to VDI or application storage on vSAN.
References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 8, Objective 3.5; [Horizon]; [Dynamic Environment Manager]


NEW QUESTION # 34
A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics.
Which performance category should the vSAN administrator open?

  • A. Backend
  • B. Host Network
  • C. Resvnc Latency
  • D. Disks

Answer: A

Explanation:
Explanation
To view the resynchronizing metrics, the vSAN administrator should open the Backend performance category.
This category shows the performance of vSAN data components, such as read/write latency, IOPS, throughput, congestion, and resync traffic. The other categories are not relevant for this task. Disks shows the performance of physical disks in the cluster, Host Network shows the network performance of vSAN hosts, and Resvnc Latency shows the latency of resynchronization operations. References: 1, page 23; 3, section 6.4


NEW QUESTION # 35
A vSAN administrator needs to update vSAN from version 7.0.2 to version 8.0.
Which is the correct order to perform the update?

  • A. vCenter -> vSphere -> vSAN on-disk format
  • B. vSphere -> vCenter -> vSAN on-disk format
  • C. vSAN on-disk format -> vSphere -> vCenter
  • D. vSphere -> vSAN on-disk format -> vCenter

Answer: A

Explanation:
Explanation
The correct order to perform the update from vSAN version 7.0.2 to version 8.0 is to upgrade the vCenter Server first, then upgrade the ESXi hosts, and finally upgrade the vSAN on-disk format. This order follows the general vSphere upgrade order, which ensures compatibility and interoperability between different components. Upgrading the vCenter Server first allows it to manage and monitor the ESXi hosts and the vSAN cluster during the upgrade process. Upgrading the ESXi hosts second ensures that they have the latest software patches and drivers for vSAN. Upgrading the vSAN on-disk format last enables the new features and functionality of vSAN 8.0. The other options are not correct, as they do not follow the recommended upgrade order.


NEW QUESTION # 36
A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleague inquires about the Operations Reserve option.
What is the purpose of using this option?

  • A. Reserves space for tolerating failures
  • B. Allocates space forvSAN uparades
  • C. Configures space for external operations
  • D. Provides space for internal operations

Answer: D

Explanation:
Explanation
The purpose of using the Operations Reserve option in the vSAN ReadyNode Sizer is to provide space for internal operations such as deduplication, compression, encryption, snapshots, clones, and rebalancing. The Operations Reserve is calculated as a percentage of the total usable capacity of the vSAN cluster. The default value is 30%, but it can be adjusted based on the expected workload characteristics and data services requirements. The other options are not correct, as they do not describe the Operations Reserve option. Configuring space for external operations, reserving space for tolerating failures, and allocating space for vSAN upgrades are not part of the Operations Reserve option. References: 2, section 2; , section 3


NEW QUESTION # 37
A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.
Which would satisfy the customer's requirement?

  • A. Perform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA
  • B. Deploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4
  • C. Deploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration
  • D. Deploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design

Answer: D

Explanation:
Explanation
Deploying the application on a new cluster with vSAN 8.0 ESA using a new hardware design is the correct answer because it will satisfy the customer's requirement for low latency. vSAN 8.0 ESA is a new architecture that uses a storage pool configuration where all disks are treated as capacity disks and use a new algorithm to distribute data across them. This improves the I/O flow, reduces the write amplification, and eliminates the cache tier bottleneck. Using a new hardware design with all-flash disks or NVMe disks will further enhance the performance and latency of the application, as these disks have faster read and write speeds than hybrid disks. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additionalstripe width of 4, deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration, and performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA are not valid or optimal solutions for this scenario. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4 will increase the resiliency and availability of the data, but it will also increase the network traffic, disk space consumption, and parity calculation overhead, which will negatively affect the latency and performance of the application. Deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration will not improve the latency significantly, as vSAN 8.0 OSA still uses the same disk group configuration as vSAN 7.0 U2 OSA, where one disk is designated as a cache disk and the rest are capacity disks. The cache disk can still become a bottleneck for high-performance applications, especially if it is not an SSD or NVMe disk. Performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA is not possible, as vSAN ESA requires a different hardware design than vSAN OSA. The existing disk groups need to be deleted and all disks need to be erased before switching to vSAN ESA. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 6
What's New in VMware vSAN 8.0


NEW QUESTION # 38
A vSAN administrator is responsible for managing a customer's production vSAN cluster that is going to be used to provide SMB file shares to a number of host clients. The vSAN administrator must take action so the performance of all services in the production vSAN cluster can be monitored.
Which two services must be enabled for this monitoring to occur? (Choose two.)

  • A. vSAN Performance Service
  • B. iSCSI Target Service
  • C. vSAN File Services
  • D. vSAN Performance Diagnostic Service
  • E. vSAN Health Service

Answer: A,C

Explanation:
Explanation
To monitor the performance of vSAN File Services, the vSAN administrator must enable both the vSAN File Services and the vSAN Performance Service. The vSAN File Services provides SMB file shares to host clients, while the vSAN Performance Service collects and analyzes performance statistics and displays them in the vSphere Client. The other services are not related to vSAN File Services performance monitoring.
References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 9, Objective 7.4; [vSAN File Services];
[vSAN Performance Service]


NEW QUESTION # 39
An administrator is tasked to create a Kerberos secured NFS v4.1 file share.
Which information is minimally required during the configuration of the File Service?

  • A. Organizational Unit, User Account, Password
  • B. Active Directory Domain. Organizational Unit, User Account. Password
  • C. Kerberos Server, User Account, Password
  • D. Active Directory Domain, User Account, Password

Answer: D

Explanation:
Explanation
To create a Kerberos secured NFS v4.1 file share, the administrator needs to provide the following information during the configuration of the File Service:
Active Directory Domain: The domain name of the Active Directory server that provides Kerberos authentication service for the NFS server and clients. For example, example.com.
User Account: The user name of the Active Directory account that has permissions to join the NFS server to the domain and create service principal names (SPNs) for the NFS server. For example, [email protected].
Password: The password of the Active Directory account that is used for authentication. For example, P@ssw0rd.
These information are required to enable Kerberos security for NFS 4.1 and allow the NFS server to obtain a Kerberos ticket from the Active Directory server. The administrator also needs to specify the NFS share name, path, and access permissions1 References: 1: VMware vSphere Storage Guide, page 118


NEW QUESTION # 40
An administrator is responsible for managing a five-node vSAN cluster. The vSAN Cluster is configured with both vSphere High Availability (HA) and vSphere Distributed Resource Scheduler (DRS). The vSAN Cluster is currently hosting 150 virtual machines that have consumed 60% of the usable capacity.
Each virtual machine belongs to one of the following vSAN Storage Policies:
vSANPolicy1:
Site Disaster Tolerance: None
Failures to Tolerate: 1 failure - RAID-5 (Erasure Coding)
vSANPolicy2:
Site Disaster Tolerance: None
Failures to Tolerate: No data redundancy
Following an unplanned power event within the data center, the administrator has been alerted to the fact that one host has permanently failed.
What will be the impact to any virtual machine that was running on the failed host using vSANPolicy1?

  • A. Each virtual machine will be restarted on another vSAN host usingvSphere HA.
  • B. Each virtual machine will be unavailable for up to 90 minutes while the automatic recovery process completes.
  • C. vSAN will defer the start of the recovery process for 60 minutes, and the virtual machines will not power on until the recovery process has been completed.
  • D. Each virtual machine must be restored from backup.

Answer: A

Explanation:
Explanation
The impact to any virtual machine that was running on the failed host using vSANPolicy1 is that each virtual machine will be restarted on another vSAN host using vSphere HA. This is because vSANPolicy1 has a Failures to Tolerate setting of 1 failure - RAID-5 (Erasure Coding), which means that each object has four components (three data and one parity) distributed across four hosts. If one host fails, the object can still be accessed with the remaining three components,and vSphere HA will restart the virtual machine on another host. vSAN will also try to rebuild the missing component on another host, if there is enough capacity and resources. The other options are incorrect because they either assume that the object is unavailable or that the recovery process is delayed or impossible. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 16


NEW QUESTION # 41
A six-node vSAN ESA cluster contains multiple virtual machines, and a vSAN storage policy with the rule
"Failures to tolerate" set to "1 failure - RAID-5 (Erasure Coding)" is assigned. A vSAN administrator has changed the rule in the assigned policy to "2 failures - RAID-6 (Erasure Coding)".
What is the result of this change?

  • A. The changes are queued for 60 minutes.
  • B. The updated policy is serially applied to the virtual machines.
  • C. The policy change is rejected immediately.
  • D. No changes occur until the policy is reapplied.

Answer: B

Explanation:
Explanation
The updated policy is serially applied to the virtual machines is the correct answer because changing the rule in the assigned policy will trigger a policy compliance check and a resynchronization of the affected objects.
The policy change will not be rejected, queued, or ignored, as it is a valid and supported operation. However, the policy change will not be applied in parallel, as that would cause too much network and disk traffic.
Instead, the policy change will be applied one virtual machine at a time, starting with the most critical ones, until all virtual machines are compliant with the new policy. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 9


NEW QUESTION # 42
A vSAN administrator has a group of requirements from the application team, which mandates spreading the components across storage devices as much as possible.
What should the vSAN Administrator consider to achieve such a requirement for building a new vSAN cluster? (Choose two.)

  • A. Create a dedicated Storage Pool in ESA
  • B. Enable Force Provisioning in OSA
  • C. Configure disk striping in OSA
  • D. Configure disk striping in ESA
  • E. Enable deduplication for vSAN

Answer: C,E

Explanation:
Explanation
To spread the components across storage devices as much as possible, the vSAN administrator can configure disk striping in either OSA or ESA. Disk striping is a policy attribute that defines the number of capacity devices across which each replica of a storage object is striped. A higher number of stripes can result in better performance and availability, but also consumes more storage space. Disk striping can be configured in OSA by using the Number of disk stripes per object policy attribute, or in ESA by using the Striping Width policy attribute12 References: 1: VMware vSAN Specialist v2 Exam Preparation Guide, page 14 2: VMware vSAN Design and Sizing Guide, page 32


NEW QUESTION # 43
A vSAN administrator is planning to deploy a new vSAN cluster with these requirements:
* Physical adapters share capacity among several traffic types
* Guaranteed bandwidth for vSAN during bandwidth contention
* Enhanced security
Which two actions should be taken to configure the new vSAN cluster to meet these requirements? (Choose two.)

  • A. Isolate vSAN traffic in a VLAN
  • B. Enable jumbo frames
  • C. Utilize Network I/O Control
  • D. Create static routes between the vSAN hosts
  • E. Use IOPS Limit rules in storaqe policies

Answer: A,C

Explanation:
Explanation
Utilizing Network I/O Control and isolating vSAN traffic in a VLAN are the two actions that should be taken to configure the new vSAN cluster to meet the requirements. Network I/O Control allows the vSAN administrator to create network resource poolsand assign bandwidth shares or reservations to different traffic types, such as vSAN, vMotion, or management. This ensures that vSAN traffic has guaranteed bandwidth during contention and can achieve better performance and availability. Isolating vSAN traffic in a VLAN enhances the security of the cluster by preventing unauthorized access or interference from other network segments. It also simplifies the network configuration and management by reducing the broadcast domain and avoiding IP address conflicts. Creating static routes between the vSAN hosts, using IOPS Limit rules in storage policies, and enabling jumbo frames are not necessary or recommended actions for this scenario. Static routes are not required for vSAN communication, as vSAN uses multicast or unicast depending on the version and configuration. IOPS Limit rules are used to limit the IOPS allocated to an object, which can degrade the performance and latency of the application. Jumbo frames can improve the network efficiency and throughput, but they are not mandatory for vSAN and require consistent configuration across all network devices.
References:
Network I/O Control
vSAN Network Design Guide


NEW QUESTION # 44
A vSAN administrator wants to transition from VMware Update Manager to vSphere Lifecycle Manager.
Which element is a mandatory requirement to create an image?

  • A. Vendor Add-On
  • B. Component
  • C. ESXi Version
  • D. Firmware and Drivers Add-On

Answer: C

Explanation:
Explanation
To create an image using vSphere Lifecycle Manager, the mandatory requirement is to specify the ESXi version. An image is a collection of software components that define the desired state of hosts in a cluster. An image must include at least one ESXi version component, which determines the base hypervisor software for the hosts. Optionally, an image can also include other components, such as vendor add-ons, firmware and drivers add-ons, or custom components. The other options are not correct. A component is a generic term for any software element that can be included in an image, but it is not a specific type of component. A firmwareand drivers add-on is an optional component that provides firmware and drivers updates for hardware devices on the hosts. A vendor add-on is an optional component that provides vendor-specific software for the hosts. References: About Images; Create an Image


NEW QUESTION # 45
An administrator has deployed a new vSAN OSA cluster that contains eight hosts and needs to configure a storage policy for the currently deployed database virtual machines. The requirements state that if two hosts in the vSAN OSA cluster fail, all virtual machines are unaffected.
Which RAID configuration must the administrator use in this storage policy to achieve the best performance for the database virtual machines?

  • A. RAID-5
  • B. RAID-0
  • C. RA1D-1
  • D. RAID-6

Answer: C

Explanation:
Explanation
To achieve the best performance for the database virtual machines and tolerate two host failures in a vSAN OSA cluster, the administrator must use RAID-1 as the RAID configuration in the storage policy. RAID-1 is a mirroring technique that creates multiple replicas of each object across different hosts. RAID-1 provides the best performance among the available RAID configurations, as it does not involve any parity calculations or stripe splitting. To tolerate two host failures, the administrator must set the Failures to Tolerate (FTT) policy to
2, which means that each object will have three replicas. The other options are not correct. RAID-5 and RAID-6 are erasure coding techniques that split each object into data segments and parity segments across different hosts. RAID-5 can tolerate one host failure, while RAID-6 can tolerate two host failures. However, both RAID-5 and RAID-6 have lower performance than RAID-1, as they involve more complex calculations and network traffic. RAID-0 is a striping technique that splits each object into multiple stripes across different hosts. RAID-0 does not provide any data redundancy or fault tolerance, and therefore cannot tolerate any host failure. References: RAID Configurations, FTT, and Host Requirements; RAID 5 or RAID 6 Design Considerations


NEW QUESTION # 46
An administrator wishes to prevent vCenter notifications of vSAN Health status during a scheduled maintenance window.
Which action can be taken to achieve this goal?

  • A. Run performance diagnostics prior to scheduled maintenance
  • B. Disable the performance service
  • C. Disable SNMP service
  • D. Disable the alarm from the HTML client

Answer: D

Explanation:
Explanation
To prevent vCenter notifications of vSAN Health status during a scheduled maintenance window, the administrator can disable the alarm from the HTML client. This will suppress the alerts for a specified duration or until the alarm is re-enabled. Disabling the performance service, running performance diagnostics, or disabling SNMP service will not affect the vSAN Health status notifications. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 25


NEW QUESTION # 47
A vSAN administrator receives a request from the application team to create a virtual machine on a vSAN datastore. The requirements state that the virtual machine needs to be available quickly after a failure occurs.
The solution must minimize administrative effort.
Which vSphere feature should the vSAN administrator implement?

  • A. vSphere High Availability
  • B. vSphere Distributed Resource Scheduler
  • C. Distributed Services Engine
  • D. Fault Tolerance

Answer: A

Explanation:
Explanation
vSphere High Availability is the correct answer because it meets the requirements of making the virtual machine available quickly after a failure occurs and minimizing administrative effort. vSphere HA monitors the health and availability of the hosts and virtual machines in a cluster and automatically restarts any failed virtual machines on other hosts within minutes. vSphere HA also supports proactive HA, which can migrate virtual machines from hosts that are about to fail or have degraded performance. vSphere HA is easy to configure and manage, as it only requires enabling HA on the cluster level and setting some basic policies and options. Distributed Services Engine,Fault Tolerance, and vSphere Distributed Resource Scheduler are not valid or optimal solutions for this scenario. Distributed Services Engine is a new feature in vSphere 7 that provides network services such as firewalling, load balancing, routing, and NAT for virtual machines and containers. It does not directly affect the availability or recovery of virtual machines after a failure. Fault Tolerance provides continuous availability for virtual machines by creating a secondary copy of the virtual machine that runs in lockstep with the primary copy on another host. If the primary copy fails, the secondary copy takes over without any interruption or data loss. However, Fault Tolerance has some limitations and overheads, such as requiring dedicated network bandwidth, supporting only one vCPU per virtual machine, and consuming twice as much CPU and memory resources as a single virtual machine. Fault Tolerance also requires more administrative effort than vSphere HA, as it needs to be enabled and configured for each individual virtual machine. vSphere Distributed Resource Scheduler is a feature that balances the workload and resources across a cluster by automatically migrating virtual machines based on their demand and priority.
It does not directly affect the availability or recovery of virtual machines after a failure, although it can work together with vSphere HA to find optimal hosts for restarting failed virtual machines. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 11
vSphere Availability
Distributed Services Engine
vSphere Distributed Resource Scheduler


NEW QUESTION # 48
A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.
Why is this situation occurring?

  • A. vSAN performance service is not enabled.
  • B. The vRealize Operations Manager is not integrated with vSAN cluster.
  • C. vSAN performance statistics are only available via CLI.
  • D. The administrator has read-only permissions on the cluster level.

Answer: A

Explanation:
Explanation
The reason why the vSAN administrator cannot find any vSAN performance statistics on the cluster summary page is that the vSAN performance service is not enabled. The vSAN performance service is a feature that collects and analyzes performance metrics and displays them in graphical charts in vCenter. The vSAN performance service must be turned on manually for each vSAN cluster, as it is not enabled by default. The other options are not correct. The integration of vRealize Operations Manager with the vSAN cluster is not required to view vSAN performance statistics, as they are available in vCenter. The administrator's permissions on the cluster level do not affect the visibility of vSAN performance statistics, as they are accessible to any user who can view the cluster. vSAN performance statistics are not only available via CLI, as they can also be viewed in vCenter using the vSAN performance service. References: About the vSAN Performance Service; Enable or Disable the Performance Service


NEW QUESTION # 49
An administrator has to perform maintenance on one of the hosts in a three-node vSAN Cluster.
Which maintenance mode option will give the administrator the best availability for the VMs with the least effort and data transfer?

  • A. Migrate all VMs and their storage from the host to a different storage system
  • B. Full data migration
  • C. Migrate all VMs and their storage from the host to a different vSphere cluster
  • D. Ensure accessibility

Answer: D

Explanation:
Explanation
To perform maintenance on one of the hosts in a three-node vSAN cluster with the best availability for the VMs with the least effort and data transfer, the maintenance mode option that should be used is Ensure accessibility. This option migrates only enough components to ensure that all accessible VMs remain accessible, but does not guarantee full data redundancy or policy compliance. This option is also the only evacuation mode available for a three-node cluster or a cluster with three fault domains, as there are not enough hosts to perform full data migration or re-protection after a failure. The other options are not correct.
Migrating all VMs and their storage from the host to a different storage system or a different vSphere cluster would require more effort and data transfer than using Ensure accessibility, as well as additional resources and configuration steps. Full data migration is not possible in a three-nodecluster, as it would require at least four hosts to evacuate all data from one host and maintain full redundancy and policy compliance.
References: Place a Member of vSAN Cluster in Maintenance Mode; Working with Maintenance Mode


NEW QUESTION # 50
A site administrator wishes to implement HCI mesh between two clusters on vSAN that are located in geographically separate sites and which are administered within a single datacenter.
Which two requirements should the vSAN administrator consider to accomplish this goal? (Choose two.)

  • A. NIC teaming must be implemented for the vSAN network vmkernel port
  • B. The configuration must meet the same latency and bandwidth requirement as local vSAN
  • C. Encryption must be disabled prior to configuring HCI mesh
  • D. A leaf spine topology is required for core redundancy and reduced latency
  • E. Either Layer 2 or Layer 3 communications can be used

Answer: B,E

Explanation:
Explanation
To implement HCI mesh between two clusters on vSAN that are located in geographically separate sites, the vSAN administrator should consider the following requirements:
Either Layer 2 or Layer 3 communications can be used. HCI mesh supports both Layer 2 and Layer 3 network configurations, as long as the network latency and bandwidth requirements are met3 The configuration must meet the same latency and bandwidth requirement as local vSAN. HCI mesh requires a network latency of less than or equal to 5 ms RTT between any two hosts in the participating clusters, and a network bandwidth of at least 10 Gbps for the vSAN network vmkernel port3 References: 3: VMware vSAN Specialist v2 Exam Preparation Guide, page 15


NEW QUESTION # 51
A three-node vSAN OSA cluster with business critical intensive I/O workload is running out of capacity. Each host consists of five disk groups with four capacity disks. The administrator needs to expand the capacity of the vSAN datastore as soon as possible.
What should the administrator do?

  • A. Add additional capacity disks to each disk group
  • B. Add additional capacity by addinga vSAN ReadyNode to the cluster
  • C. Enable Deduplication and Compression on the cluster level
  • D. Add additional capacity by adding a disk on one host and creating a storage pool

Answer: A

Explanation:
Explanation
The correct answer is D, add additional capacity disks to each disk group. This is because adding capacity disks to existing disk groups is the fastest and easiest way to expand the capacity of the vSAN datastore without disrupting any ongoing operations or requiring additional hardware. The administrator can add up to five capacity disks per disk group in vSAN OSA, which means each host can have up to 25 capacity disks in total. The administrator should make sure that the new capacity disks are unformatted and not partitioned, so that vSAN can recognize and claim them. The administrator should also manually rebalance the cluster after adding the capacity disks to distribute the data evenly across the new devices. The other options are incorrect for the following reasons:
A, enable Deduplication and Compression on the cluster level, is incorrect because enabling Deduplication and Compression is not a recommended way to expand the capacity of the vSAN datastore. Deduplication and Compression is a space efficiency feature that reduces the logical space consumption of data by eliminating duplicate blocks and applying compression algorithms. However, enabling Deduplication and Compression requires a full data evacuation and resynchronization, which can be disruptive and time-consuming. Deduplication and Compression also introduces additional CPU and memory overhead, which can affect the performance of the cluster. Deduplication and Compression is only supported on all-flash clusters, not on hybrid clusters.
B, add additional capacity by adding a disk on one host and creating a storage pool, is incorrect because creating a storage pool is not supported in vSAN OSA. A storage pool is a new configuration introduced in vSAN 8 ESA, where all disks are treated as capacity disks and use a new algorithm to distribute data acrossthem. This configuration is not compatible with vSAN OSA, which uses a disk group configuration where one disk is designated as a cache disk and the rest are capacity disks. To use a storage pool, the administrator would need to migrate to vSAN 8 ESA on a new cluster with new hardware.
C, add additional capacity by adding a vSAN ReadyNode to the cluster, is incorrect because adding a vSAN ReadyNode to the cluster is not the fastest or easiest way to expand the capacity of the vSAN datastore. A vSAN ReadyNode is a preconfigured server that meets the hardware requirements for running vSAN. Adding a vSAN ReadyNode to the cluster would require additional hardware procurement, installation, and configuration. It would also increase the compute capacity of the cluster, which may not be necessary for the workload. Adding a vSAN ReadyNode would also trigger a resynchronization of data across the cluster, which can affect the performance and availability of the cluster. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 10


NEW QUESTION # 52
An administrator is deploying a new two-node vSAN cluster with a shared witness to a remote location.
Which requirement must be met?

  • A. The ESXi host's drives must be configured in RAID 1 to support Failures to Tolerate of 1.
  • B. The ESXi host's controller cache and advanced features must be disabled.
  • C. The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.
  • D. The ESXi hosts must have a minimum of 64 GBs of memory.

Answer: D

Explanation:
Explanation
To deploy a new two-node vSAN cluster with a shared witness, the administrator must meet several requirements, one of which is that the ESXi hosts must have a minimum of 64 GBs of memory. This is because each host must have enough memory to run the VMs and also to support the vSAN metadata overhead. The other options are not requirements for a two-node vSAN cluster with a shared witness. The ESXi hosts do not need SSDs or NVMe for Virtual Flash File System, as they can use any supported storage devices for vSAN. The ESXi host's controller cache and advanced features do not need to be disabled, as they can be used to improve performance and reliability. The ESXi host's drives do not need to be configured in RAID 1, as vSAN uses its own software-defined RAID mechanism to provide Failures to Tolerate.
References: Shared Witness for 2-Node vSAN Deployments; Two-Node Cluster Requirements


NEW QUESTION # 53
A vSAN administrator has an existing cluster where each ESXi host has the following:
Disk group #1 with one cache device and three capacity devices.
Disk group #2 with one cache device and two capacity devices.
What must the vSAN administrator do to expand disk group #2 to have three capacity devices?

  • A. Create a new disk group with a single capacity device and then migrate the existing capacity devices
  • B. Put the disk group in maintenance mode, evacuate all data, then add the new capacity device
  • C. Add the new capacity device to the disk group and vSAN will automatically rebalance
  • D. Put the entire ESXi host in maintenance mode, evacuate all data, then add the new capacity device

Answer: C

Explanation:
Explanation
To expand disk group #2 to have three capacity devices, the vSAN administrator should add the new capacity device to the disk group and vSAN will automatically rebalance. This action allows the administrator to increase the storage capacity of the disk group without disrupting any ongoing operations or evacuating any data. vSAN will automatically distribute data across all devices in the disk group to balance performance and utilization. The other options are not correct. Creating a new disk group with a single capacity device and then migrating the existing capacity devices is not necessary, as it would require more steps and resources than adding a device to an existing disk group. Putting the entire ESXi host or the disk group in maintenance mode and evacuating all data is not required, as it would cause downtime and data movement that could be avoided by adding a device to an existing disk group. References: Add Devices to the Disk Group; Expanding a vSAN Cluster


NEW QUESTION # 54
The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing.
Which two actions would cause this situation? (Choose two.)

  • A. VM snapshot is being deleted.
  • B. DRS is relocatingVMs between vSAN nodes.
  • C. A host failure occurs in the cluster
  • D. A change to the storage policy is applied to the objects.
  • E. HA Virtual Machine Monitoring forced a VM to reboot.

Answer: C,D

Explanation:
Explanation
Two actions that would cause some objects to be currently resyncing are:
A change to the storage policy is applied to the objects. This action triggers a resynchronization of objects to make them compliant with the new policy settings, such as FTT, RAID level, stripe width, etc. The resynchronization process copies data from one host to another to create or update replicas or parity segments.
A host failure occurs in the cluster. This action causes some objects to become non-compliant with their storage policy, as they lose one or more replicas or parity segments due to the host failure. The resynchronization process rebuilds the missing components on other hosts in the cluster to restore compliance and availability.References: : VMware vSphere Storage Guide, page 129 : Monitor the Resynchronization Tasks in the vSAN Cluster 1 : VMware vSAN Specialist v2 Exam Preparation Guide, page 13


NEW QUESTION # 55
An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.
What has to be done and configured to achieve this goal?

  • A. Distribute servers across at least three different racks and configure three fault domains
  • B. Distribute servers across at least two different racks and configure two fault domains
  • C. Enable deduplication and compression
  • D. Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks

Answer: A

Explanation:
Explanation
To ensure that a single rack failure is not going to affect the data availability, while minimizing the number of racks used, the administrator has to do the following:
Distribute servers across at least three different racks. This is because vSAN supports up to three fault domains per cluster, which can be used to tolerate one or two failures. If only two racks are used, then only one failure can be tolerated4 Configure three fault domains. A fault domain is a logical grouping of hosts that share a common failure point, such as a rack or a power supply. By configuring fault domains, vSAN can place replicas of an object across different fault domains, so that a failure within one fault domain does not result in data loss orunavailability4 References: 4: VMware vSAN Specialist v2 Exam Preparation Guide, page 13


NEW QUESTION # 56
......

5V0-22.23 are Available for Instant Access: https://www.prepawayexam.com/VMware/braindumps.5V0-22.23.ete.file.html

5V0-22.23 Certification – Valid Exam Dumps Questions Study Guide: https://drive.google.com/open?id=123WW_g3koCcBHLKawQq9gpOni-MlN4_q

Related Articles

more
VMware 5V0-22.23 Certification Practice Exam