An architect is tasked with designing a VMware Cloud Foundation (VCF) workload domain network that minimizes infrastructure overhead and accelerates deployment time for a customer adopting VPC-based workload networking. During a design workshop with the stakeholders, the following requirements were identified:
* Rapid onboarding of VPCs without deploying NSX Edge nodes.
* Basic East-West and North-South connectivity for workloads.
* External connectivity for specific VPC workloads via assigned public IPs.
* No requirement for centralized services like NAT or VPN.
After evaluating available design options, the architect makes a design decision to use a Distributed Transit Gateway (DTGW) to meet the requirements.
Which justification should the architect use for this design decision?

• A. The DTGW provides distributed Tier-0 services with Active/Active HA mode across availability zones.
• B. The DTGW supports integration with upstream routers via static routing policies defined in the NSX Edge cluster.
• C. The DTGW allows VPC workloads to access physical networks using a shared external VLAN without additional infrastructure components.
• D. The DTGW enables centralized gateway services, including NAT and VPN, without requiring NSX Edge appliances for Distributed Network Access.

An enterprise architect is designing the physical networking architecture for a greenfield VMware Cloud Foundation (VCF) deployment in a single data center. The deployment includes a management domain and multiple workload domains, utilizing NSX for software-defined networking with Geneve overlay encapsulation. NSX Edge nodes will handle North/South routing and services.
Requirements:
* Scalable, non-blocking fabric with predictable oversubscription and low latency.
* Support for high-throughput traffic including vSAN, vMotion, and NSX overlay.
* End-to-end jumbo frame support for efficiency.
* No dependency on physical multicast routing or snooping for overlay (BUM) Broadcast, Unknown- unicast, and Multicast replication.
* Redundant connectivity from hosts to the fabric.
Constraints:
* Existing Top-of-rack switches are limited to 25 GbE host-facing ports.
* The physical network does not support multicast.
* Future expansion to multiple racks and higher port speeds (25/100 GbE) is anticipated.
What are the four design decisions that fit the architecture ' s physical design? (Choose four.)

• A. Configure head-end replication mode for BUM traffic in the NSX overlay transport zone to eliminate multicast dependency.
• B. Use multicast replication mode in the NSX overlay transport zone to leverage physical network multicast for BUM traffic.
• C. Each ESX host has at least two 25 GbE physical NICs, connected redundantly to separate leaf (ToR) switches.
• D. Deploy a leaf-spine topology with Layer 3 routing BGP between leaf and spine layers for scalable ECMP routing.
• E. Implement Layer 2 extended across aggregation switches for VLAN spanning.
• F. Each ESX host with at least two 10 GbE physical NICs, connected redundantly to separate leaf (ToR) switches.
• G. Enable jumbo frames MTU 9190 end-to-end across all switch ports, inter-switch links, and VLAN Layer 3 interfaces used for host transport traffic.

An architect is designing a VMware Cloud Foundation (VCF) Single Sign-On (SSO) architecture for a customer environment.
The following requirements have been identified:
REQ01: Workloads must be supported across multiple physical datacenter locations (DC01 and DC02).
REQ02: Administrative access to the platform must use two-factor authentication.
REQ03: The design must minimize operational complexity when managing multiple VCF instances.
Which two design decisions should be documented to meet these requirements? (Choose two.)

• A. Deploy VCF Identity Broker (VIDB) in the first VCF instance management domain at DC01.
• B. Deploy VCF Identity Broker (VIDB) in the management domain of each VCF instance at DC02.
• C. Configure additional VCF instances within the same private cloud to use the VIDB from the first VCF instance at DC01.
• D. Deploy VCF Identity Broker (VIDB) in the management domain of every VCF instance across all sites.
• E. Configure additional VCF instances within the same region to use the VIDB from the first VCF instance at DC02.

An architect has been assigned to gather business requirements for a new VMware Cloud Foundation (VCF) solution from the client stakeholders and subject matter experts.
Which three factors should the architect discuss with the customer to determine any potential impact on the business requirements? (Choose three.)

• A. Existing software product versions
• B. Organizational structure
• C. Service-level agreements (SLAs)
• D. Average virtual machine size
• E. Storage capacity
• F. Regulatory Compliance